![]() ![]() It can operate at a frequency of 4.2 GHz and 1.40 V stable. Some of the Sharp 2 generation processors we have tested can be overclocked to a frequency of 4.2 GHz within a safe voltage, and this Ais no exception. In addition to the standard frequency, we add overclocking to the 4.2GHz Ryzne 5 2600 and take part in the test, and the i5-9400F does not support overclocking, so it can only be played in the background. The theoretical performance test: Multi-core performance Ryzne shows the advantages The test platform looks like this: On the e-commerce platform, the actual price of the Ryzne 5 2600 when purchased with the motherboard was below 1,000 yuan. In terms of price, the i5-9400F castrated is lower than the i5-8400, but the price of 1399 yuan is still 100 more expensive than the Ryzne 5 2600. Can support DDR3200 or even higher frequency memory. The Ryzne 5 2600 supports 2933MHz as standard and is also equipped with the motherboard B350 / 450 medium range. In terms of memory support, the Core i5-9400F can only support DDR2666MHz by default and must match the high-end Z390 / 370 to support higher frequency memory. It is worth noting that the i5-9400F, although the top processor such as the Core i9-9900K uses brazed heat conduction, is still a low-cost conventional silicone grease heat material, models of Ryzne 3, Ryzne 5 and Ryzne 7 are both brazed and heat conductive. But don't forget that the Ryzne 5 2600 can be overclocked: Most motherboards with a low-end motherboard can exceed the 4.2 GHz frequency, which not only fills the gap in single-core performance, but also leads the way in multi-core performance. In terms of frequency, the Ryzne 5 2600 3.7 GHz 200 MHz full core frequency is lower than the 9400F 3.9 GHz, and the maximum single core frequency is also 200 MHz lower. Level 2 Cache 3MB, Double with enemies, Level 3 Cache 16MB is also much more than 9400F 9MB. SpecificationĬompared to the i5-9400F, the Ryzne 5 2600 is also a 6-core, but with a hyper-thread design and 12 threads. The full core frequency can also reach 3.9 GHz, TDP 65W.ĪMD Ryzne 5 2600 uses 12nm nano-process technology, 6-core 12-thread design, 16-byte cache, base frequency 3.4GHz, acceleration frequency up to 3.9GHz, full-core frequency can reach 3.7GHz, TDP is also 65W. The Intel Core i5-9400F is exactly the Core i5-8500. In many major countries around the world, the share of the Ryzne processor in the retail market has exceeded that of the core processor. ![]() The high price-performance ratio has won the recognition of the market and consumers: It is the only 6-core 12-thread product with a price of 1,000 yuan. The AMD Ryzne 5 2600 is a 12-thread, second-generation 6-core Athlon product that uses the Zen+ architecture and further enhances the single-core efficiency and highest frequency of the first-generation Acer by upgrading to the 12nm process. It is this processor that still uses a silicon grease core to dissipate heat. Compared to the previous i5-8400, it is more competitive than the previous i5-8400, but requires attention. After cutting off the nuclear display, the Core i5-9400F not only improves yield and productivity, but also lowers the price of the product. The protagonists of this test are the Intel Core i5-9400F and the AMD Ryzne 5 2600 processor. For the comparison test, we select one thousand yuan product at a time. Currently, the mainstream processor is the most popular product for consumers in the thousand dollar market and also the most competitive product segment. Of course, AMD must also compete with Intel's ninth generation Intel Core processor with the existing mature second generation Athlon products before Zen 2. The Acer processor with a 7 nm Zen 2 frame will soon be published on the AMD site.
0 Comments
Leave a Reply. |